
Same-day attic testing, HEPA removal, and a clearance report you can hand to any buyer.
Attic mold testing and removal Bloomington CA
attic mold testing and removal Bloomington CA starts with a $0 visual inspection and a moisture meter reading, not a sales pitch. If we find growth on the roof deck, rafters, or blown-in insulation, we sample it, identify it, and remove it under negative air containment. We serve homeowners, landlords, and property managers across San Bernardino County, including the 92316 ZIP code, and we leave you with lab results and photos from EMSL Analytical.
What's included
What is included in attic mold testing and removal
Every job includes the inspection, the lab work, the containment, and the clearance testing. Here is what you get when you book attic mold testing and removal Bloomington CA with us, and what we treat as an add-on if your attic needs more than the standard scope.
Full attic inspection
Moisture meter readings on rafters, roof sheathing, and wood studs, plus a thermal imaging camera scan for hidden moisture and a boroscope inspection camera through tight access points. We photograph everything we find.
Lab sampling and report
One outdoor control sample plus one to three indoor spore trap samples, shipped to EMSL Analytical or Pro-Lab. You get a written report with genus identification and counts within 24 to 72 hours.
Containment and negative air
6-mil mold remediation plastic sheeting, zipper doors, and a negative air machine with HEPA filters. The attic stays under negative pressure for the entire job so spores do not migrate into your living space.
Physical mold removal
HEPA vacuuming of all affected surfaces, dry ice blasting or hand-scrubbing of framing, and application of Fiberlock or Concrobium antimicrobial. Porous materials that cannot be cleaned are bagged and disposed of properly.
Post remediation clearance testing
Fresh spore trap sampling after remediation, compared to the outdoor baseline. If counts are not back to normal, we re-clean at no extra charge. You get a written clearance letter for your records.
Moisture source report
A written summary of what caused the mold, whether it was a roof leak, a bath fan venting into the attic, or poor ventilation. You can hand it straight to your roofer or HVAC contractor.
Service overview
What attic mold testing and removal Bloomington CA involves
attic mold testing and removal Bloomington CA is a two-part service that first identifies whether the dark staining on your roof sheathing is active mold or old water staining, then removes the growth and the moisture source feeding it. We start with a boroscope inspection camera through the access hatch, take moisture meter readings on the rafters and decking, and run a spore trap sampler to capture airborne counts. If growth is confirmed, we set up negative air containment, HEPA vacuum the affected wood, and treat it with an antimicrobial coating.
Bloomington sits in a dry inland climate, but that does not stop attic mold. A single roof leak after a winter storm, a bathroom exhaust fan venting straight into the attic, or a dryer duct that popped loose can push relative humidity above 60% for weeks. We see it constantly in older ranch homes near Green Acres and Hoosier Acres where the original roof deck has been patched more than once. If you have been searching for attic mold removal near me Bloomington, the fix is a moisture source plus a remediation plan.
The service timeline
How our attic mold removal process works
The process flexes to the condition, but these checkpoints keep decisions clear.
Phone triage
Call (833) 929-5837 and describe what you are seeing: dark streaks on the roof deck, a musty smell in an upstairs closet, or staining around the access hatch. We ask about roof leaks, recent storms, and whether the bath fan vents outside. You get a same-day or next-day appointment window, usually within 24 hours.
On-site inspection
A certified mold inspector walks the attic with a moisture meter, thermal imaging camera, and boroscope inspection camera. We check roof sheathing, rafters, wood studs, insulation, and the underside of the roof deck. The inspection takes 45 to 90 minutes depending on attic size and how much storage is up there.
Sampling and lab work
We run an outdoor control sample plus one to three indoor spore trap samples, then ship them to EMSL Analytical or Pro-Lab. Results come back in 24 to 72 hours. You get the report by email with genus identification and counts, so you know whether you are dealing with black mold growth or a common Cladosporium that is not a health concern.
Contained remediation
If growth is confirmed, we return with a crew, build the containment, and run negative air. We HEPA vacuum the wood, dry ice blast or hand-scrub affected framing, apply Fiberlock or Concrobium antimicrobial, and seal porous surfaces with an encapsulation sealant. A typical 1,000 square foot attic takes one to two days.
Clearance and handoff
We run post remediation mold testing, compare indoor counts to the outdoor baseline, and photograph every treated surface. You get a clearance letter, before-and-after photos, and a written summary of the moisture source so your roofer or HVAC contractor knows exactly what to fix. Final walkthrough takes about 30 minutes.
Tools & methods
Tools and methods we use on every attic job
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Moisture meter
Reads moisture content in roof sheathing, rafters, and wood studs to confirm whether a leak is active or old. We take readings at multiple points across the attic.
Thermal imaging camera
Reveals temperature differences that point to hidden moisture behind insulation and inside wall cavities. It catches leaks a visual inspection would miss.
Boroscope inspection camera
Lets us see into tight corners, behind insulation, and through small access points without cutting into the structure.
Negative air machine with HEPA filters
Keeps the attic under negative pressure during remediation so spores do not migrate into your living space. We run it for the entire job.
HEPA vacuum
Removes settled spores and fine debris from rafters, sheathing, and framing. Standard shop vacuums just blow spores back into the air.
Dry ice blasting machine
Removes mold from wood framing without chemicals or abrasive media. It is our preferred method for exposed rafters and roof sheathing.
Spore trap sampler
Collects airborne spores on a cassette for lab analysis. We run an outdoor control sample alongside indoor samples so the comparison is meaningful.
Use cases
When to call for attic mold testing and removal
These examples show how the service framework adapts rather than forcing every call through one repair.

Bath fan venting into the attic
A landlord in Downtown Bloomington had a tenant complaining about a musty smell. The bath fan had been venting straight into the attic for years, pushing humidity above 65% and feeding mold across the rafters and wood studs. → We remediated the growth in two days, treated the framing with Concrobium, and gave the landlord a written report showing the fan needed to be re-ducted through the roof. Clearance testing came back clean.
Real estate transaction with flagged attic mold
A buyer's inspector flagged possible black mold growth on the attic sheathing of a Hoosier Acres home. The seller had no documentation and the deal was stalled for two weeks. → We ran same-day testing, confirmed Stachybotrys on about 200 square feet of sheathing, remediated under containment, and issued a clearance letter within five days. The transaction closed on schedule.
Problems we solve
Attic mold problems we solve for Bloomington homeowners
Attic mold shows up in a few predictable ways in Bloomington, and each one has a different fix. Here are the problems we run into most often and how we handle them.
Dark staining on roof sheathing after a winter storm
We test the staining to confirm whether it is active mold or old water marks, then remediate with HEPA vacuuming and dry ice blasting if growth is confirmed. We also flag the roof leak so your roofer can fix the source.
Musty smell in upstairs closets and hallways
We trace the odor with a boroscope inspection camera and thermal imaging, sample the air with spore trap cassettes, and remediate the source. Post remediation testing confirms the odor is gone.
Bathroom exhaust fan venting into the attic
We remediate the existing growth, then tell you exactly how the fan needs to be re-ducted through the roof or gable. Once the moisture source is corrected, the mold does not come back.
Mold discovered during a real estate transaction
We run same-day testing, deliver the lab report within 24 to 72 hours, and if remediation is needed we complete it and issue a clearance letter. That paperwork keeps the transaction moving.
Pricing process
What attic mold testing and removal costs
$250 - $4,500 depending on scope
Attic square footage
A 500 square foot attic takes less time and material than a 2,000 square foot attic. Square footage drives containment size, HEPA vacuum time, and antimicrobial coverage.
Access difficulty
A pull-down stair or full-size hatch makes setup fast. A tight scuttle hole or a steep roof pitch slows the crew down and adds labor time to the job.
Extent of growth
A few rafters with surface growth is a smaller scope than sheathing covered end to end. We measure affected area during the inspection and quote accordingly.
How much does attic mold testing and removal cost in Bloomington CA?
Testing alone runs $250 to $500 for an inspection plus two to four lab samples with EMSL Analytical or Pro-Lab. Full remediation on a typical Bloomington attic runs $1,200 to $4,500 depending on square footage, access, and how far the growth has spread. Small, contained spots on a few rafters can come in under $1,000. You get a flat written quote before we start.
What causes attic mold in Bloomington California?
Three things cause almost every attic mold call we run in Bloomington: a roof leak, a bathroom or dryer exhaust venting into the attic instead of outside, and poor ventilation that traps humid air. In our dry inland climate, the culprit is usually a leak after a winter storm or a bath fan that was never ducted through the roof. Fix the moisture and the mold stops coming back.
Can attic mold be removed without replacing insulation in Bloomington CA?
Yes, in most cases. If the mold is on the roof deck, rafters, and wood studs, we HEPA vacuum, dry ice blast, and treat the framing without touching the insulation. Blown-in or batt insulation only gets replaced when it is visibly contaminated, wet, or holding spores. We test the insulation separately and tell you honestly whether it can stay.
Who does attic mold removal near me in Bloomington?
We do. Our crew covers Bloomington, San Bernardino County, and the 92316 ZIP code, including Green Acres, Hoosier Acres, and the neighborhoods around Downtown Bloomington. Call (833) 929-5837 and we will schedule an inspection, usually within 24 hours. Same-day testing is available if you call before noon.
Ready when you are
Book attic mold testing and removal Bloomington CA today
Call (833) 929-5837 and we will schedule an inspection, usually within 24 hours. Same-day testing is available if you call before noon. You get a written quote, lab-backed results, and a clearance letter when the job is done.

Talk with the local team
Request Attic Mold Testing And Removal
Call (833) 929-5837 any time, day or night, and a live person will answer. We schedule free inspections seven days a week and can usually get to your BLOOMINGTON property the same day. If you prefer email, send photos of what you are seeing and we will follow up with next steps.


