Certified Mold Inspector

Licensed mold inspector in Bloomington CA for homes and businesses

Certified mold inspector Bloomington CA you can actually reach

When you need a certified mold inspector Bloomington CA homeowners call first, we show up with moisture meters, thermal cameras, and lab-backed sampling. Our licensed mold inspector in Bloomington CA covers San Bernardino County homes, rentals, and commercial buildings, from attic mold to crawl space growth. You get a written report, lab results, and a clear next step, usually within 24 to 48 hours.

Live phone supportUpfront optionsBacked workmanship
Call firstLive triage can help before arrival
Safety before speedRisks assessed before work begins
Diagnose the causeWe trace the source, not just the symptom
Approve the workScope and price explained upfront

What's included

What is included in a certified mold inspection

Every certified mold inspection Bloomington includes a full visual walkthrough, moisture mapping, and air or surface sampling. We document everything with photos and a written report. If you need additional samples or a crawl space-specific inspection, we will tell you upfront what it adds to the cost.

01

Full visual walkthrough

We inspect the attic, crawl space, bathrooms, kitchen, laundry, and any area near a known leak. A boroscope inspection camera lets us see inside wall cavities without cutting drywall. Every finding is photographed and noted on a floor plan.

02

Moisture mapping

A moisture meter and thermal imaging camera trace water behind walls, under floors, and in ceilings. We mark readings on a map so you can see exactly where the problem is and how wet it is. This is what tells us whether mold is active or old.

03

Air and surface sampling

We collect indoor and outdoor air samples with spore trap cassettes and take surface swabs from visible growth. Samples go to EMSL Analytical or Pro-Lab under chain-of-custody. Lab results come back in 24 to 48 hours.

04

Written report and protocol

You get a PDF with photos, moisture maps, lab data, and a remediation protocol that follows ANSI/IICRC S520. The report is written so a third-party contractor could execute it, and it holds up with insurers, landlords, and escrow.

05

Phone walkthrough

We call you to explain the findings in plain language. If remediation is needed, we explain the scope. If it is a small area you can handle yourself, we tell you that too. No pressure and no upsell.

Service overview

What a certified mold inspector Bloomington CA does

A certified mold inspector Bloomington CA is a trained assessor who locates mold growth, identifies the moisture source feeding it, and documents both with photos, moisture readings, and lab analysis. We do not just look at the black spot on your ceiling. We map the whole building: attic sheathing, crawl space joists, bathroom walls, and the wood studs behind your drywall. Every inspection follows ANSI/IICRC S520 and California Department of Public Health guidelines, so your report holds up with landlords, insurers, and escrow.

Bloomington sits in San Bernardino County, where summer attic temperatures push past 130 degrees and winter rain finds every roof leak. That swing feeds hidden mold after leaks, musty odors, and attic mold that most homeowners never see. If you have been searching for a certified mold inspector in Bloomington CA after a water heater failure or a slow supply-line drip, we test the air with spore trap cassettes and a spore trap sampler, then send samples to EMSL Analytical or Pro-Lab for confirmation.

Lab-backed answersWe collect air and surface samples with spore trap cassettes and air sampling media, then send them to EMSL Analytical or Pro-Lab. You get genus-level results, not a handheld meter beeping at you. Most reports come back in 24 to 48 hours, so you know exactly what you are dealing with before you spend a dollar on remediation.
We find the water sourceMold needs moisture, period. Our technicians use a moisture meter and thermal imaging camera to trace the leak behind the wall, whether it is a failed supply line, a roof flashing gap, or a crawl space with no vapor barrier. Fix the water and the mold stops coming back. Skip that step and you are paying twice.
Reports that hold upOur documentation follows ANSI/IICRC S520 and California Department of Public Health guidelines. That matters when you are filing an insurance claim, negotiating a repair credit with a seller, or proving to a landlord that the bathroom mold is not just cosmetic. A certified mold assessor Bloomington CA report is evidence, not opinion.
Quality Certified Mold Inspector in BLOOMINGTON
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.

The service timeline

How our certified mold inspection works

The process flexes to the condition, but these checkpoints keep decisions clear.

01

Phone intake

We ask what you are seeing and smelling: a stain, a musty odor, a recent leak, or a failed inspection during escrow. You tell us the address and the age of the home. We schedule a window that works, usually same-day or next-day for active leaks. No call center, no runaround.

Stage 1
02

On-site assessment

Our inspector walks the property with a moisture meter, thermal imaging camera, and boroscope inspection camera. We check the attic, crawl space, bathrooms, kitchen, and any wall near a known leak. We photograph everything and note moisture readings on a floor plan so you can see exactly where the problem is.

Stage 2
03

Air and surface sampling

We set spore trap cassettes for indoor and outdoor control samples, then take surface swabs from visible growth. Samples go to EMSL Analytical or Pro-Lab under chain-of-custody. This is what separates a certified mold assessor Bloomington CA from a guy with a flashlight and an opinion.

Stage 3
04

Lab analysis and report

Results come back in 24 to 48 hours. We build a written report with photos, moisture maps, lab data, and a remediation protocol that follows ANSI/IICRC S520. You get a PDF you can forward to your insurer, your landlord, or your real estate agent the same day we finalize it.

Stage 4
05

Walkthrough and next steps

We call you to walk through the findings in plain language. If remediation is needed, we explain the scope and what it will take. If it is a small area you can handle with Concrobium and a dehumidifier, we tell you that too. No pressure, no upsell.

Stage 5

Tools & methods

Tools and methods we use on every inspection

Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.

01

Moisture meter

Pin and pinless meters measure water content in drywall, wood, and concrete. This tells us whether mold is active or old and helps us trace the moisture source.

02

Thermal imaging camera

Infrared cameras show temperature differences behind walls, which reveals hidden moisture without cutting into drywall. We use it to map the extent of the problem before we sample.

03

Boroscope inspection camera

A boroscope lets us see inside wall cavities, ductwork, and crawl space joists through a small hole. It is how we confirm hidden mold after leaks without demolition.

04

Spore trap sampler and cassettes

We use a spore trap sampler with spore trap cassettes to collect air samples. These capture airborne spores for lab analysis, which is the standard method for confirming indoor mold levels.

05

Air scrubber and HEPA vacuum

During remediation, air scrubbers with HEPA filters and HEPA vacuums keep spores from spreading. We use them on every cleanup job to protect the rest of your home.

06

Negative air machine

Negative air machines maintain pressure inside containment so spores cannot escape into clean areas. This is required under ANSI/IICRC S520 for any remediation beyond a small patch.

07

Dry ice blasting machine

For wood studs and framing, a dry ice blasting machine removes mold without water or chemicals. It is fast, leaves no residue, and works well in attics and crawl spaces.

Use cases

When to call a certified mold inspector

These examples show how the service framework adapts rather than forcing every call through one repair.

Certified Mold Inspector
Attic mold from a slow roof leakA homeowner in Prospect Hill noticed a musty smell in the hallway but could not find any visible mold. A roof leak from the previous winter had been dripping onto attic sheathing for months. Moisture readings were elevated across 200 square feet of sheathing, and lab samples confirmed elevated spore counts indoors. → We scoped containment and removal for the affected sheathing. After remediation, post-remediation testing showed indoor spore levels back to normal. The homeowner fixed the roof flashing and added attic ventilation. Total time from inspection to clearance was 11 days.

Crawl space mold in a 1960s ranch home

A rental property in Kirkwood had a tenant complaining about a musty smell in the living room. The crawl space had no vapor barrier, and joists were covered in white and black growth. Moisture readings on the joists were above 20 percent, which is well into the mold growth range. → We removed affected insulation, treated the joists with antimicrobial coating, and installed a vapor barrier. Post-remediation air samples came back clean. The tenant renewed the lease, and the property manager now includes crawl space checks in the annual maintenance schedule.

Bathroom mold behind tile

A homeowner in Downtown Bloomington had recurring mold on the bathroom ceiling and grout lines. Cleaning with bleach killed the surface growth, but it returned within weeks. A moisture meter found elevated readings behind the shower wall, and a boroscope inspection camera confirmed mold on the drywall backing. → We scoped removal of the affected drywall and treatment of the framing. The bathroom fan was venting into the attic instead of outside, which was the root cause. After fixing the vent and completing remediation, clearance testing confirmed the space was clean. No recurrence in the following year.

Problems we solve

Mold problems we solve for Bloomington homeowners

Most mold calls start with a smell, a stain, or a failed home inspection. By the time you notice it, the growth has usually been there for weeks. Here are the problems we see most often in Bloomington and how we solve them.

ISSUE

Musty odor with no visible mold

We use a thermal imaging camera and boroscope inspection camera to find the source without tearing out walls. Air samples with spore trap cassettes confirm whether spores are elevated indoors. Once we find the moisture source, we give you a scope to fix it.

SYMPTOM

Attic mold from a roof leak

We inspect the attic with a moisture meter and photograph affected sheathing. If growth is confirmed, we scope removal and treatment. Dry ice blasting mold is an option for wood studs and rafters because it leaves no residue and does not add moisture.

SIGN

Crawl space mold and damp insulation

We inspect with a boroscope inspection camera and take surface samples from joists. If remediation is needed, we remove affected insulation, treat the wood, and recommend a vapor barrier. A dehumidifier keeps the space dry going forward.

ALERT

Bathroom mold that keeps coming back

We test to confirm the species, then find the moisture source with a moisture meter. If the bathroom fan vents into the attic instead of outside, that is often the culprit. We scope the fix and the cleanup so it does not come back.

Pricing process

What a certified mold inspection costs in Bloomington

$250 - $600 for most residential inspections; commercial and multi-unit quoted by scope

Phase 01

Square footage

Larger homes take longer to inspect and usually need more samples. A 1,200-square-foot home might need two air samples, while a 3,000-square-foot home could need four or five to cover all living areas and the attic.

Phase 02

Number of samples

Each air or surface sample adds to the lab cost. We recommend a sample count based on the size of the home and the scope of the concern. If you want extra samples for peace of mind, we will add them.

Phase 03

Crawl space or attic access

Crawl spaces and attics take extra time and sometimes require a boroscope inspection camera to reach tight areas. If access is difficult or the space is unusually large, it affects the total.

Questions before we arrive

Frequently Asked Questions

Certified Mold Inspector
Call (833) 929-5837
How much does a certified mold inspector cost in Bloomington CA?

Most residential inspections in Bloomington run $250 to $600 in 2026, depending on square footage and how many samples we collect. A basic visual inspection with two air samples sits at the low end. Crawl space or attic inspections with extra samples push toward the top. You get a written report and lab results either way. Call (833) 929-5837 for a quote based on your address.

What certifications should a mold inspector have in Bloomington California?

Look for IICRC AMRT or ACAC CMI credentials, and confirm the company follows ANSI/IICRC S520 and California Department of Public Health guidelines. IICRC WRT is a bonus because it means the inspector understands water damage, which is what causes most mold. Ask for the certification name and the issuing body. A real certified mold assessor Bloomington CA will answer that without hesitation.

How do I verify a licensed mold inspector in Bloomington CA?

Ask for their certification number and the issuing organization, then check that organization's online directory. California does not issue a standalone mold inspector license, so certification comes from IICRC, ACAC, or a similar body. A legitimate licensed mold inspector near me Bloomington California will give you the credential and the lab they use without dodging the question.

Is there a certified mold inspector near me in Bloomington?

Yes. We serve all of Bloomington and the surrounding San Bernardino County area, including 92316 and nearby ZIP codes. Same-day and next-day appointments are usually available, and emergency calls get priority. If you are near Kirkwood, Downtown Bloomington, or Blue Ridge, we can typically be on site within a few hours. Call (833) 929-5837 to schedule.

Ready when you are

Book a certified mold inspector Bloomington CA today

If you smell something musty or see a stain that was not there last month, do not wait. Mold spreads fast once moisture is present. Call (833) 929-5837 and we will schedule a certified mold inspection Bloomington at your address, often the same day. Lab-backed answers, honest scopes, no scare tactics.

Certified Mold Inspector

Talk with the local team

Request Certified Mold Inspector

Call (833) 929-5837 any time, day or night, and a live person will answer. We schedule free inspections seven days a week and can usually get to your BLOOMINGTON property the same day. If you prefer email, send photos of what you are seeing and we will follow up with next steps.

18762 Valley Blvd, Bloomington, CA 92316, USA, BLOOMINGTON, CaliforniaMain office · technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now