Black Mold Inspection

Certified inspectors, lab-backed results, same-day scheduling

Black mold inspection Bloomington CA done right the first time

When you book a black mold inspection Bloomington CA homeowners trust, you get a certified inspector on site, moisture mapping, and lab-verified air samples, not a guess. We serve houses, rentals, and commercial buildings across San Bernardino County. If you smell something musty, see dark staining, or had a leak last winter, call (833) 929-5837 and we will find the source.

Live phone supportUpfront optionsBacked workmanship
Call firstLive triage can help before arrival
Safety before speedRisks assessed before work begins
Diagnose the causeWe trace the source, not just the symptom
Approve the workScope and price explained upfront

What's included

What is included in a black mold inspection

Every inspection includes a full visual walkthrough, moisture mapping, and a written report. Air and surface sampling are standard on most jobs but can be adjusted based on what we find. Remediation is a separate scope, quoted only if the inspection confirms growth.

01

Full visual assessment

Attic, crawl space, basement, bathrooms, kitchen, laundry, and any room with past water damage. We check for visible growth, staining, and warped or soft materials.

02

Moisture mapping

Moisture meter and thermal imaging camera readings logged room by room. We identify wet materials behind finished surfaces without opening walls unnecessarily.

03

Air and surface sampling

Spore trap cassettes for indoor and outdoor air, plus tape-lift or swab samples on visible growth. Samples ship to an accredited lab the same day.

04

Written report with photos

Time-stamped photos, moisture readings, lab results, and a scope of work if remediation is needed. Formatted for insurance, real estate, and legal use.

05

Phone walkthrough of findings

We call you after the report is ready and walk through what we found, what it means, and what your options are. No jargon, no pressure to book remediation.

Service overview

What black mold inspection Bloomington CA actually involves

A black mold inspection Bloomington CA is a full visual and instrument-based evaluation of your building for active mold growth, hidden moisture, and elevated spore counts. We start with a moisture meter and thermal imaging camera to find wet materials behind drywall and under flooring, then use a boroscope inspection camera inside wall cavities and HVAC chases. Air samples go into spore trap cassettes and get sent to a lab like EMSL Analytical or Pro-Lab for analysis. You get a written report with photos, lab numbers, and a clear scope of what needs to come out.

Bloomington sits in San Bernardino County where summer attic temps push past 140 degrees and winter rain finds every roof leak. That swing feeds black mold growth in attics, crawl spaces, and bathrooms faster than most homeowners expect. If you have had water damage mold after a slab leak or a slow supply-line drip, a black mold testing and inspection Bloomington CA visit catches it before spores spread through the house. We also handle emergency black mold inspection Bloomington CA calls when a pipe lets go overnight.

Lab-verified resultsWe collect air and surface samples in spore trap cassettes and send them to an accredited lab. You get raw spore counts, genus identification, and a comparison to outdoor baseline. No vague 'looks like mold' language, just numbers you can hand to your insurance adjuster or your landlord.
Hidden mold found fastThermal imaging and moisture meters read through drywall, tile, and carpet. In a typical Bloomington home we locate the wet stud bay in under 30 minutes. That means we open one wall, not five, and you save on both inspection and repair.
Insurance-ready reportsOur reports include photos, moisture readings, lab results, and a scope of work. Most carriers want that documentation before they approve a claim. We format it so your adjuster can process it without a back-and-forth.
Professional Black Mold Inspection in BLOOMINGTON
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.

The service timeline

How our inspection process works

The process flexes to the condition, but these checkpoints keep decisions clear.

01

Phone intake

You call (833) 929-5837 and tell us what you are seeing or smelling. We ask about recent leaks, roof work, or flooding. We schedule a two-to-four-hour window and confirm whether you want air sampling, surface sampling, or both. No dispatch fee for standard appointments.

Stage 1
02

On-site walkthrough

A certified inspector walks the property with you. We check the attic, crawl space, bathrooms, kitchen, laundry, and any area with past water damage. Moisture meter and thermal camera readings get logged room by room. This usually takes 45 to 90 minutes depending on square footage.

Stage 2
03

Targeted sampling

We set spore trap cassettes for indoor and outdoor air, plus tape-lift or swab samples on visible growth. Samples are labeled, sealed, and shipped to the lab the same day. Lab turnaround is typically 24 to 72 hours.

Stage 3
04

Lab analysis and report

The lab returns spore counts by genus. We build a report with photos, moisture maps, lab data, and a remediation scope if needed. You get a PDF by email and a phone call to walk through the findings.

Stage 4
05

Remediation plan and quote

If mold is confirmed, we provide a written scope with containment, removal, and clearance testing steps. You decide whether to move forward with us or another contractor. There is no pressure and no obligation to book remediation with us.

Stage 5

Tools & methods

Tools and methods we use

Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.

01

Thermal imaging camera

Reads temperature differences behind drywall, under flooring, and inside wall cavities to find hidden moisture without opening surfaces.

02

Moisture meter

Pin and pinless readings on drywall, wood, and concrete. Confirms whether a material is wet enough to support mold growth.

03

Boroscope inspection camera

Slips inside wall cavities, HVAC chases, and subfloor spaces to visually confirm growth where the eye cannot reach.

04

Spore trap sampler and cassettes

Collects airborne spores for lab analysis. We run indoor and outdoor samples to establish a baseline comparison.

05

HEPA vacuum and air scrubber

Captures airborne spores during inspection and remediation. HEPA filters trap particles down to 0.3 microns.

06

Negative air machine

Maintains containment pressure during remediation so spores do not migrate into clean areas of the building.

07

Dehumidifier and Dri-Eaz drying equipment

Removes moisture from structural materials after water intrusion. Dri-Eaz and Phoenix Restoration Equipment are our standard drying rigs.

Use cases

When to book a black mold inspection

These examples show how the service framework adapts rather than forcing every call through one repair.

Black Mold Inspection
Attic mold after winter roof leakA homeowner in Sycamore Knolls noticed a musty smell in the upstairs hallway. The roof had leaked the previous winter, and the attic insulation was still damp. Visible dark growth covered about 40 square feet of roof decking. → We contained the attic, removed the impacted insulation, and treated the decking with dry ice blasting mold removal. Post-remediation mold testing came back clean. Total job took two days, and the homeowner's insurance covered most of it.

Bathroom wall cavity from slow leak

A rental unit in Downtown Bloomington had a persistent musty odor in the bathroom. A slow supply-line leak behind the vanity had been wetting the wall cavity for months. The tenant reported allergy symptoms that eased when away from the unit. → We opened one wall section, removed the impacted drywall and insulation, and treated the framing with antimicrobial coating. Air samples dropped from 1,800 spores per cubic meter to under 200. The property manager had documentation for the insurance claim.

Crawl space mold in 1950s ranch home

A homeowner in Bloomington Central called about a musty smell that got worse in summer. The crawl space had no vapor barrier and the floor joists were damp. Visible mold growth covered about 60 percent of the joist surfaces. → We installed a vapor barrier, treated the joists with Concrobium, and ran a dehumidifier for three days to bring moisture levels down. Post-remediation testing confirmed clearance. The musty smell was gone within a week.

Problems we solve

Problems our black mold inspection near me service solves

Mold is a symptom, not the root problem. Our job is to find both, then give you a clear path forward.

ISSUE

Musty smell with no visible mold

We use a boroscope inspection camera and thermal imaging to look inside walls and ductwork. Air sampling confirms whether spore counts are elevated. Once we locate the source, we give you a removal scope and a moisture fix.

SYMPTOM

Mold after a roof or plumbing leak

We inspect the leak area, surrounding framing, and any materials that stayed wet. If growth is confirmed, we quote remediation with containment and HEPA filtration, then run post-remediation mold testing to verify clearance.

SIGN

Attic or crawl space mold discovered during a sale

We run a full assessment with photos, lab results, and a remediation scope. Reports are formatted for agents, buyers, and lenders. We can usually turn the inspection around within 24 to 48 hours.

ALERT

Health symptoms that ease when you leave home

We sample indoor and outdoor air and compare spore counts by genus. If levels are elevated, we identify the source and recommend a remediation plan. If they are not, we tell you that too and suggest other causes to check.

Pricing process

What black mold inspection costs

$250 - $650 for most residential inspections; commercial quoted by scope

Phase 01

Property size

Larger homes take longer to inspect and usually need more samples. A 1,200 square foot home might need two air samples, while a 3,000 square foot home could need four or five.

Phase 02

Number of samples

Each air or surface sample carries a lab fee of $40 to $75. More samples give a clearer picture but add to the total. We recommend based on what we find during the walkthrough.

Phase 03

Access difficulty

Crawl spaces with limited access, attics with low clearance, or areas requiring partial demolition take more time. We quote access work separately if needed.

Questions before we arrive

Frequently Asked Questions

Black Mold Inspection
Call (833) 929-5837
How much does black mold inspection cost in Bloomington CA?

Most residential inspections in Bloomington run $250 to $650 in 2026, depending on square footage and how many samples you need. A basic visual inspection with two air samples sits at the low end. Full assessments with multiple rooms, crawl space, and attic sampling land higher. Lab fees are usually $40 to $75 per sample. We quote the total before we schedule.

How do I know if I have black mold in Bloomington California?

Three signs point to it: a musty, earthy smell that does not go away, dark staining on drywall, baseboards, or window frames, and allergy-type symptoms that ease when you leave the house. Bloomington's heat and winter rain make attics and crawl spaces the usual suspects. If you had a roof leak or plumbing drip in the last year, get a black mold testing and inspection Bloomington CA visit.

Is black mold inspection covered by insurance in Bloomington CA?

It depends on the cause. Most California policies cover mold inspection and remediation when it stems from a sudden, covered event like a burst pipe or storm intrusion. Long-term neglect or slow leaks are usually excluded. We write our reports with the documentation adjusters need, and we can talk to your carrier directly if that helps move the claim.

Who does black mold inspection near me in Bloomington?

We do. Our certified inspectors cover all of Bloomington and the surrounding San Bernardino County area, including 92316 and nearby ZIP codes. We run same-day appointments and 24/7 emergency dispatch for active water intrusion. Call (833) 929-5837 and we can usually get an inspector to your door the same day.

Ready when you are

Book your black mold inspection Bloomington CA today

Certified inspectors, lab-verified results, and same-day scheduling across San Bernardino County. Call (833) 929-5837 and we will get an inspector to your property, usually the same day. If you smell something musty or see dark staining, do not wait.

Black Mold Inspection

Talk with the local team

Request Black Mold Inspection

Call (833) 929-5837 any time, day or night, and a live person will answer. We schedule free inspections seven days a week and can usually get to your BLOOMINGTON property the same day. If you prefer email, send photos of what you are seeing and we will follow up with next steps.

18762 Valley Blvd, Bloomington, CA 92316, USA, BLOOMINGTON, CaliforniaMain office · technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now