
Licensed inspectors, lab-backed results, and a straight answer on what to do next
Commercial mold inspection Bloomington CA that protects your building and your people
When your building smells musty or a roof leak soaked the ceiling tiles, commercial mold inspection Bloomington CA tells you exactly what is growing and where. We inspect offices, retail spaces, warehouses, and multi-unit properties across San Bernardino County, document every finding with photos and lab results, and hand you a written scope you can act on. Same-day scheduling is available.
What's included
What is included in a commercial mold inspection
Every commercial mold inspection Bloomington CA job includes the same core deliverables, whether the building is 2,000 or 60,000 square feet. Add-on sampling, additional HVAC zones, and post-remediation verification are quoted separately so you only pay for what your building needs.
Full moisture mapping
We check walls, ceilings, subfloor, and HVAC closets with a moisture meter and thermal imaging camera. Any reading above normal triggers a closer look with a boroscope inspection camera so we can see inside the cavity without cutting it open.
Air and surface sampling
Indoor air samples collected with a spore trap sampler, plus outdoor control samples for comparison. Visible growth gets tape or swab samples sent to an accredited lab like EMSL Analytical or Pro-Lab under chain of custody.
Written report with photos
You get a documented report showing moisture readings, sample locations, photos of affected areas, and lab results with genus-level identification. It is written to be handed to an insurer, tenant, or attorney without extra explanation.
Moisture source identification
Finding mold is only half the job. We trace each area of growth back to its water source, whether that is a failed roof flashing, a condensate pan, a slab moisture issue, or a supply-line leak inside a wall.
Remediation scope under S520
If removal is needed, we outline containment, material removal, drying, and clearance testing requirements under ANSI/IICRC S520. The scope separates confirmed growth from clean zones so you can bid the work accurately.
Service overview
What commercial mold inspection Bloomington CA actually covers
A commercial mold inspection Bloomington CA is a documented, room-by-room investigation of a commercial building for active mold growth, moisture sources, and airborne spore contamination. We start with a moisture meter and thermal imaging camera to map wet building materials behind drywall, above ceiling tiles, and under flooring. Then we collect air samples with a spore trap sampler and surface samples on visible growth, log humidity readings, and photograph everything. You get a written report with lab results from an accredited lab like EMSL Analytical or Pro-Lab, plus a clear scope of what needs remediation and what does not.
Bloomington sits in San Bernardino County, where summer attic temperatures push past 130 degrees and winter rain finds every failed roof flashing. Commercial buildings here take a beating: flat roofs pond water, HVAC pans overflow into ceiling grids, and slab-on-grade retail spaces wick moisture up through the concrete. We have run commercial mold assessment Bloomington calls on 40-year-old strip centers near Valley Boulevard and newer warehouses off the 10 freeway. If you need a business mold inspection near me Bloomington California, we can be on site the same day you call.
The service timeline
How our commercial mold inspection process runs
The process flexes to the condition, but these checkpoints keep decisions clear.
Phone intake
You call (833) 929-5837 and tell us what you are seeing: a musty odor, a stained ceiling tile, a tenant complaint, or a recent water event. We ask about building size, HVAC type, and any prior leaks, then book a window. Most Bloomington commercial inspections are scheduled within 24 to 48 hours.
Walkthrough and moisture mapping
On site, we walk the building with a moisture meter and thermal imaging camera, checking walls, ceilings, subfloor, and HVAC closets. A boroscope inspection camera lets us look inside wall cavities without cutting large holes. This stage usually takes 60 to 120 minutes depending on square footage.
Air and surface sampling
We run outdoor control samples plus indoor air samples with a spore trap sampler, and take tape or swab samples from any visible growth. Samples go to an accredited lab under chain of custody. Lab turnaround is typically 24 to 72 hours.
Written report and lab results
You receive a report with photos, moisture readings, a floor-plan sketch of affected areas, and the lab analysis. We flag confirmed growth, probable growth, and clean zones separately, and note the moisture source behind each one. We walk you through it by phone so nothing gets lost in the paperwork.
Remediation scope and next steps
If remediation is needed, we outline the containment, removal, and drying work required under ANSI/IICRC S520. If it is a small area you can handle in-house, we tell you that too. No pressure and no upsell on square footage that does not need work.
Tools & methods
Tools and methods we use on every inspection
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal imaging camera
Reveals temperature differences that indicate hidden moisture behind drywall, above ceiling tiles, and inside wall cavities without cutting into finished surfaces.
Moisture meter
Confirms and quantifies moisture content in drywall, wood studs, and concrete so we know whether a material is wet enough to support mold growth.
Boroscope inspection camera
Lets us look inside wall cavities, ductwork, and ceiling plenums through a small access hole, so we can confirm growth without major demolition.
Spore trap sampler
Collects airborne mold spores onto a cassette for lab analysis, giving us indoor spore counts to compare against an outdoor control sample.
HEPA vacuum and air scrubber
Captures airborne spores and debris during inspection and remediation so we do not spread contamination into occupied tenant space.
Negative air machine
Maintains negative pressure inside containment during remediation, keeping spores from migrating into clean areas of the building.
Dri-Eaz and Phoenix dehumidifiers
Dry wet building materials after a water event so mold does not colonize the structure before remediation can begin.
Use cases
When Bloomington businesses call us for mold inspection
These examples show how the service framework adapts rather than forcing every call through one repair.

Restaurant walk-in cooler wall
A Bloomington restaurant had recurring mold growth around the walk-in cooler and dish pit. Staff had cleaned it three times in a year, and it kept coming back within weeks. The visible growth covered roughly 20 square feet. → Inspection traced the moisture to a slow supply-line leak inside the wall and failed caulking at the floor seam. We removed the affected drywall, treated the framing with antimicrobial coating, and resealed the wall. Lab results confirmed clean after remediation.
Warehouse racking and inventory
A 40,000 square foot warehouse off the 10 freeway had musty inventory and a night-shift complaint. Roof leaks had gone unnoticed above high-bay racking for at least two seasons. Air sampling showed elevated spore counts in two storage zones. → We documented the affected zones, scoped containment and removal under ANSI/IICRC S520, and remediated 1,200 square feet of ceiling deck and insulation. Post-remediation testing matched outdoor control levels.
Problems we solve
Commercial mold problems we solve in Bloomington
Most commercial mold calls start with one of a handful of problems. Here is what we see most often in Bloomington buildings and how we handle each one.
Musty odor with no visible mold
We use a thermal imaging camera and moisture meter to find the wet area behind finished surfaces, then confirm with air sampling. In most Bloomington cases the source is a slow leak or a condensate issue that never showed a stain.
Ceiling stains after a roof leak
We inspect above the ceiling with a boroscope inspection camera, sample the cavity, and document the extent of moisture. The report tells you whether the fix is a tile swap or a full remediation with containment.
Tenant complaint about air quality
Our commercial mold inspection for offices Bloomington CA produces a written, lab-backed record. You get spore counts, control comparisons, and a timeline you can hand to a tenant or an investigator.
Mold found during a property transaction
We run a full commercial mold assessment Bloomington with air and surface sampling, then deliver a report that separates confirmed growth from clean areas. That lets both sides price the actual remediation instead of guessing.
Pricing process
What commercial mold inspection costs in Bloomington
$350 - $1,200 depending on building size and sample count
Building square footage
Larger buildings need more sample points and more walkthrough time. A 2,000 square foot office might need three air samples; a 40,000 square foot warehouse can need ten or more to cover each HVAC zone properly.
Number of HVAC zones
Each air handling unit serves a distinct zone and needs its own sampling to tell you whether contamination is localized or building-wide. Multi-zone buildings cost more to inspect but give you a much more accurate scope.
Suspected hidden growth
If we need to use a boroscope inspection camera or open small access holes to confirm growth inside wall cavities, that adds time. It also prevents you from paying to remediate areas that tested clean.
How much does commercial mold inspection cost in Bloomington CA?
Most commercial mold inspections in Bloomington run $350 to $1,200 depending on building square footage and how many samples we collect. A small office under 3,000 square feet with three air samples typically lands near the low end. A warehouse with multiple HVAC zones and a dozen sample points runs higher. Lab fees are included in the quote, and we give you the number before we schedule.
What does commercial mold inspection include in Bloomington California?
Every inspection includes a full walkthrough with a moisture meter and thermal imaging camera, air sampling with a spore trap sampler, surface sampling of visible growth, outdoor control samples, and a written report with accredited lab results. We also document the moisture source behind any growth we find. You get photos, moisture readings, and a remediation scope under ANSI/IICRC S520.
How often should businesses get mold inspection in Bloomington CA?
Once a year is the baseline for most commercial buildings in Bloomington, and every six months if you have had prior water damage, a flat roof, or a basement or crawl space. Schedule one within 48 hours of any leak, flood, or HVAC overflow. Buildings near the 10 freeway corridor with heavy seasonal rain exposure benefit from a spring inspection after the wet season.
Who does commercial mold inspection near me in Bloomington?
Mold Remediation Service Bloomington handles commercial mold inspection and testing Bloomington CA for offices, retail, warehouses, and multi-family properties. We are based in Bloomington, work throughout San Bernardino County, and can be on site the same day for emergencies. Call (833) 929-5837 and we will schedule a walkthrough around your operating hours.
Ready when you are
Book your commercial mold inspection Bloomington CA today
We are licensed, insured, and available 24/7 for emergency calls. Lab-backed results, upfront pricing, and a written scope you can act on. Call (833) 929-5837 and we will get an inspector to your Bloomington building, often the same day.

Talk with the local team
Request Commercial Mold Inspection
Call (833) 929-5837 any time, day or night, and a live person will answer. We schedule free inspections seven days a week and can usually get to your BLOOMINGTON property the same day. If you prefer email, send photos of what you are seeing and we will follow up with next steps.



