Crawl Space Mold Removal

Licensed, insured crews for every crawl space under your home

Crawl Space Mold Removal Bloomington CA You Can Count On

Crawl Space Mold Removal Bloomington CA starts with finding the moisture, not just scrubbing the fuzz. We pull the vapor barrier, run a moisture meter and thermal imaging camera across the joists, and tell you exactly where the water is coming from. Then we remove the growth, treat the wood, and dry the space out so it stays gone. Serving San Bernardino County homeowners from 92316 to Sherwood Oaks.

Live phone supportUpfront optionsBacked workmanship
Call firstLive triage can help before arrival
Safety before speedRisks assessed before work begins
Diagnose the causeWe trace the source, not just the symptom
Approve the workScope and price explained upfront

What's included

What Our Crawl Space Mold Removal Includes

Every crawl space mold removal Bloomington CA job we quote includes inspection, containment, removal, treatment, drying and a clearance test. If your space needs encapsulation or a vapor barrier replacement, that is quoted separately so you can see exactly what you are paying for. No hidden line items, no surprise add-ons after the crew is already under the house.

01

Full Crawl Space Inspection

Moisture meter and thermal imaging camera readings on every joist, subfloor and rim board. We photograph the affected areas and note the moisture source so you can see exactly what we found.

02

Air And Surface Sampling

Spore trap cassettes for air samples and swabs for surface growth. Samples go to EMSL Analytical or Pro-Lab, and you get the written report within 24 to 48 hours.

03

Containment And Negative Air

6-mil mold remediation plastic sheeting, zipper doors and a negative air machine with HEPA filters. The space stays under negative pressure the entire time we are working.

04

Removal And HEPA Vacuuming

Bagged removal of contaminated insulation, HEPA vacuuming of all wood surfaces, and dry ice blasting machine treatment on heavy growth. Everything leaves the space in sealed bags.

05

Antimicrobial Treatment

Fogging with Benefect or Concrobium, followed by an antimicrobial coating on the wood studs and subfloor. This is what keeps regrowth from starting the next time humidity spikes.

06

Post-Remediation Clearance Test

New air samples after drying, sent to the lab for comparison against outdoor baseline. You get a clearance document showing the space passed, plus a written maintenance plan.

Service overview

What Crawl Space Mold Removal Bloomington CA Actually Involves

Crawl space mold removal Bloomington CA is the process of containing, removing and treating fungal growth on the wood, insulation and subfloor inside the vented space under a house, then correcting the moisture source so it does not return. It is not a spray-and-pray job. We set up mold remediation plastic sheeting and zipper doors, run a negative air machine with HEPA filters, and pull contaminated insulation out in sealed bags before any surface work begins.

Bloomington sits in San Bernardino County where summer attic and crawl space temperatures push past 110 degrees and winter rain dumps on clay soil that drains slowly. That swing drives condensation on cold copper lines and wood studs, and it is the number one reason we get called for crawl space mold remediation Bloomington CA. If you have had a plumbing leak, a slow supply-line drip, or standing water after a storm, hidden mold after leaks is almost guaranteed within 48 to 72 hours.

Kill The Musty OdorThat wet-cardboard smell in your hallway is mold spore contamination, not dust. We treat the joists and subfloor with Fiberlock and Concrobium antimicrobial coating, then run a fogger through the space. Most homeowners notice the smell is gone within 24 hours of the final wipe-down.
Stop Rot Before It SpreadsMold eats the cellulose in wood, and a joist that loses 20 percent of its cross-section is a structural problem, not a cleaning problem. Catching black mold growth early on floor joists and rim boards in Bloomington homes saves you from sistering or replacing framing later.
Cleaner Air UpstairsWe run a spore trap sampler before and after every crawl space mold cleanup Bloomington CA job and send the cassettes to EMSL Analytical. You get lab numbers showing airborne spore counts dropped, not just a verbal 'it looks better.' That report matters if anyone in the house has allergies or asthma.
Local Mold Remediation Service team in BLOOMINGTON
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.

The service timeline

How Our Crawl Space Mold Removal Process Works

The process flexes to the condition, but these checkpoints keep decisions clear.

01

Inspection And Testing

We crawl the whole space with a moisture meter and thermal imaging camera, photograph every affected joist, and take air samples with a spore trap sampler. A boroscope inspection camera gets us into the tight corners behind ductwork. This usually takes 60 to 90 minutes and you get the findings the same day.

Stage 1
02

Containment Setup

Before a single bag comes out, we hang 6-mil mold remediation plastic sheeting across the access hatch and build a zipper door entry. A negative air machine with HEPA filters pulls the space under negative pressure so spores do not drift into your kitchen. Setup runs about two hours on a typical 1,200 square foot crawl space.

Stage 2
03

Removal And Cleaning

Techs in full personal protective equipment bag and remove contaminated insulation, then HEPA vacuum every wood surface. Heavy growth on joists gets dry ice blasting machine treatment, which lifts mold off wood without soaking it. We finish with Shockwave or RMR-86 on the worst staining.

Stage 3
04

Treatment And Drying

We fog the entire space with Benefect or Concrobium, then apply an antimicrobial coating to the wood studs and subfloor. A Dri-Eaz dehumidifier and air scrubber run until moisture readings drop back to baseline, which is typically 24 to 48 hours. We do not pull containment until the meter says dry.

Stage 4
05

Verification And Report

We run post-remediation mold testing with new spore trap cassettes and send them to EMSL Analytical or Pro-Lab. When the lab report shows counts at or below the outdoor baseline, we hand you the clearance document, photos of every stage, and a written maintenance plan.

Stage 5

Tools & methods

Tools And Methods We Use

Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.

01

Moisture Meter

Reads the moisture content of wood joists and subfloor. Anything above 20 percent is a mold risk, and we meter every accessible surface before and after treatment.

02

Thermal Imaging Camera

Finds cool spots that indicate hidden moisture behind insulation or under flooring. It is how we locate leaks that a visual inspection would miss.

03

Boroscope Inspection Camera

Slides into tight spaces behind ductwork and between joists. We use it to trace plumbing leaks and confirm mold spread in areas we cannot reach by hand.

04

Negative Air Machine With HEPA Filters

Keeps the crawl space under negative pressure during removal so spores do not drift into the living space. Runs the entire time we are working.

05

Dry Ice Blasting Machine

Lifts mold off wood studs and joists without adding water. It is the preferred method for heavy growth on framing that needs to stay dry.

06

Dri-Eaz Dehumidifier

Pulls moisture out of the air and the wood after removal. We run it until moisture readings return to baseline, usually 24 to 48 hours.

07

Spore Trap Sampler

Collects airborne spores on a cassette for lab analysis. We sample before and after every job so you have documented proof the space cleared.

Use cases

When To Call For Crawl Space Mold Removal

These examples show how the service framework adapts rather than forcing every call through one repair.

Crawl Space Mold Removal
Supply Line Leak In Downtown BloomingtonA slow drip from a copper supply line had been soaking the subfloor for at least six weeks. Insulation was saturated, mold covered roughly 40 percent of the joists, and the homeowner could smell musty air in the hallway above. → We contained the space, removed all wet insulation, HEPA vacuumed and dry ice blasted the joists, then fogged with Benefect. Post-remediation air sampling came back at outdoor baseline. Total job time was four days including drying.

Storm Water Intrusion In Sherwood Oaks

Winter storms pushed water under the house through a failed foundation vent. Standing water sat for two weeks before the homeowner called. Mold had started on the rim board and the bottom plate of the subfloor. → We pumped the standing water, ran Dri-Eaz dehumidifiers for 48 hours, then removed and treated the affected framing. Moisture readings dropped from 28 percent to 11 percent. Lab clearance passed on the first test.

Vapor Barrier Failure In Prospect Hill

The original 4-mil vapor barrier had been patched so many times it was more tape than plastic. Relative humidity in the crawl space was holding at 85 percent, and mold had colonized the south-facing joists where airflow was worst. → We removed the old barrier, treated the joists with Shockwave and an antimicrobial coating, and installed a new 10-mil vapor barrier with sealed seams. Humidity dropped to 55 percent within a week and stayed there.

Problems we solve

Crawl Space Problems We Fix In Bloomington

Most crawl space calls start with a smell, a high utility bill or a floor that feels soft underfoot. By the time a homeowner notices, the growth has usually been there for weeks. Here are the problems we solve most often.

ISSUE

Slow plumbing leak soaking the subfloor

We trace the leak with a boroscope inspection camera, document it for your plumber, then contain and remove the mold once the repair is done. Drying runs 24 to 48 hours before we pull containment.

SYMPTOM

Torn or missing vapor barrier

We remove the old barrier, treat the wood, and install a new 6-mil or 10-mil vapor barrier with sealed seams. Most Bloomington homes see relative humidity drop below 60 percent after this alone.

SIGN

Musty odor drifting into living space

We run air sampling to confirm the spore load, then remove the growth, HEPA vacuum the space and fog with Benefect. Most homeowners report the smell is gone within a week of the final treatment.

ALERT

Black mold growth on floor joists

Dry ice blasting machine treatment lifts the growth off the wood without adding moisture. We follow with Shockwave or RMR-86 on staining, then an antimicrobial coating to protect the framing.

Pricing process

Crawl Space Mold Removal Pricing

$1,800 - $6,500 depending on scope

Phase 01

Square footage of the space

A 600 square foot crawl space takes roughly half the labor and materials of a 1,200 square foot space. Containment, HEPA vacuuming and treatment are all priced by area.

Phase 02

Severity of mold growth

Light surface growth wipes off with an antimicrobial treatment. Heavy growth that has penetrated the wood needs dry ice blasting or media blasting, which adds time and equipment cost.

Phase 03

Wet insulation removal

Saturated fiberglass insulation has to be bagged and hauled out, then replaced. On a typical Bloomington home this adds $400 to $900 depending on how much is affected.

Questions before we arrive

Frequently Asked Questions

Crawl Space Mold Removal
Call (833) 929-5837
How much does crawl space mold removal cost in Bloomington CA?

Most crawl space jobs in Bloomington run $1,800 to $6,500 in 2026, with a typical 1,200 square foot space landing around $3,200. Light surface growth on a few joists can come in under $2,000. Heavy contamination plus encapsulation pushes toward the top of the range. Testing, containment, removal, treatment and the clearance report are all in the number we quote you.

What causes crawl space mold in Bloomington California?

The two biggest causes here are plumbing leaks and poor ventilation. Bloomington's clay soil holds winter rain against the foundation, and vented crawl spaces pull that damp air in all summer. Add a slow supply-line drip or a condensate line that drains under the house and you have mold within 48 to 72 hours. Missing or torn vapor barrier is the third most common trigger we see.

Can I stay in my home during crawl space mold removal in Bloomington CA?

Yes, in almost every case. We build containment at the access hatch and run negative air so spores stay in the crawl space, not your living room. You will hear equipment running for 24 to 48 hours during the drying phase and should keep kids and pets away from the hatch. If testing shows toxic mold exposure risk, we will tell you before we start.

Who does crawl space mold removal near me in Bloomington?

We do, and we cover the whole city plus the surrounding San Bernardino County neighborhoods. Call (833) 929-5837 and we will schedule an inspection, usually same day. Our techs work out of Bloomington and know the housing stock here, from older pier-and-beam homes near Downtown Bloomington to newer builds out toward Renwick.

Ready when you are

Book Crawl Space Mold Removal Bloomington CA Today

If you smell musty air or found growth under the house, every week you wait lets it spread further into the framing. Call (833) 929-5837 and we will schedule an inspection, usually the same day. Licensed, insured and working to ANSI/IICRC S520 on every job.

Crawl Space Mold Removal

Talk with the local team

Request Crawl Space Mold Removal

Call (833) 929-5837 any time, day or night, and a live person will answer. We schedule free inspections seven days a week and can usually get to your BLOOMINGTON property the same day. If you prefer email, send photos of what you are seeing and we will follow up with next steps.

18762 Valley Blvd, Bloomington, CA 92316, USA, BLOOMINGTON, CaliforniaMain office · technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now