
Thermal imaging, air sampling, and lab results in 24-48 hours
Home mold inspection Bloomington CA you can trust
When you book a home mold inspection Bloomington CA homeowners trust, you get a certified inspector who checks every room, attic, and crawl space for hidden growth. Our residential mold inspection in Bloomington CA uses thermal imaging cameras and moisture meters to find what your eyes miss. If you smell something musty or you've had a leak, call us today.
What's included
What's included in your inspection
Every home mold inspection includes a comprehensive assessment of your property. We check all accessible areas and use professional-grade equipment to find hidden growth. Here's what you get.
Full visual walkthrough
We inspect every room, the attic, crawl space, basement, and garage. We check under sinks, behind appliances, around windows, and along baseboards for signs of mold growth and moisture damage.
Moisture meter readings
We take moisture readings across walls, ceilings, and floors. Elevated readings indicate water intrusion even when surfaces look dry. This helps us map where mold is likely growing.
Thermal imaging scan
A thermal imaging camera reveals temperature differences behind walls and under floors. Cool spots often indicate hidden moisture and mold growth that visual inspection would miss.
Air sampling
We collect air samples using spore trap cassettes in problem areas and compare them to outdoor baseline levels. Samples go to EMSL Analytical or Pro-Lab for accredited lab analysis.
Surface sampling
If we see visible growth, we take surface samples with swabs or tape lifts. Lab analysis identifies the mold species, including whether it's black mold growth or another type.
Written report with lab results
You get a full report with photos, moisture readings, lab results, and spore counts. If remediation is needed, we include a written scope of work with pricing.
Service overview
Home mold inspection Bloomington CA done right
A home mold inspection Bloomington CA is a full visual and technical evaluation of your property for mold growth, moisture intrusion, and airborne spore contamination. We start with a moisture meter and thermal imaging camera to map damp areas behind drywall, under flooring, and inside wall cavities. Then we collect air samples using spore trap cassettes and send them to an accredited lab like EMSL Analytical or Pro-Lab. You get a written report with lab results, photos, and a clear remediation plan if growth is found.
Bloomington sits in San Bernardino County where summer heat hits triple digits and winter rains soak into stucco and slab foundations. That swing creates condensation inside walls and attics, which is exactly where black mold growth starts. If you've had a roof leak, a slab leak, or your AC condensate line backed up, a house mold inspection Bloomington is the fastest way to find out how far the moisture spread. We also serve buyers who need a home mold inspection before buying Bloomington CA properties.
The service timeline
What to expect during your inspection
The process flexes to the condition, but these checkpoints keep decisions clear.
Phone assessment
When you call, we ask about water damage history, musty odors, visible growth, and any recent leaks. This takes about 10 minutes and helps us bring the right equipment. We'll schedule your visit, often same-day or next-day.
Visual walkthrough
Our certified inspector walks every room, the attic, crawl space, basement, and garage. We check under sinks, behind appliances, around windows, and along baseboards. We're looking for discoloration, warping, and that telltale musty odor that signals attic mold or crawl space mold.
Moisture mapping
We run a moisture meter across walls, ceilings, and floors to find elevated readings. Then we use a thermal imaging camera to see temperature differences behind surfaces. This combination catches hidden mold after leaks that visual inspection alone would miss.
Air and surface sampling
We set up spore trap samplers in problem areas and collect air samples using spore trap cassettes. If we see visible growth, we take surface samples with swabs or tape lifts. Samples go to the lab the same day.
Report and recommendations
You get your lab results in 24-48 hours. We walk you through the findings, show you photos, and explain what each spore count means. If remediation is needed, we provide a written scope of work with pricing.
Tools & methods
Tools and methods we use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal imaging camera
Reveals temperature differences behind walls and under floors to find hidden moisture and mold growth.
Moisture meter
Measures moisture content in walls, ceilings, and floors to identify water intrusion even when surfaces look dry.
Boroscope inspection camera
Allows us to see inside wall cavities, HVAC ducts, and crawl spaces without cutting into surfaces.
Spore trap sampler
Collects air samples using spore trap cassettes to measure airborne mold spore counts.
Air scrubber
Filters airborne spores during remediation to prevent cross-contamination to other areas of your home.
HEPA vacuum
Removes mold spores from surfaces and materials during remediation. HEPA filters trap particles as small as 0.3 microns.
Dehumidifier
Removes moisture from the air to dry out affected areas and prevent mold from returning after remediation.
Use cases
When to schedule a mold inspection
These examples show how the service framework adapts rather than forcing every call through one repair.

Crawl space mold affecting air quality
Family in Kirkwood had allergies that worsened indoors. Air sampling showed elevated spore counts. Crawl space inspection found extensive mold growth on floor joists and subfloor from inadequate vapor barrier. → We removed mold from all affected surfaces, treated wood with Concrobium, and installed a new vapor barrier. Post-remediation air testing showed spore counts dropped by 85%. Family reported allergy symptoms improved within a week.
Bathroom mold from slow leak
Homeowner in Downtown Bloomington saw discoloration on bathroom wall. Moisture meter readings were elevated. Thermal imaging revealed mold behind the wall from a slow supply line leak that had been running for months. → We documented the extent of growth and provided a remediation scope. After repair and remediation, the wall was rebuilt and treated with antimicrobial coating. Post-remediation testing confirmed the area was clear.
Problems we solve
Mold problems we solve for Bloomington homeowners
Mold shows up in different ways depending on your home's age, construction, and water history. Here are the most common problems we find during inspections.
Musty odors with no visible mold
We use thermal imaging and boroscope cameras to find the source. Air sampling confirms whether spore counts are elevated. Once we locate the growth, we give you a clear plan to remove it and fix the moisture source.
Mold after a roof or plumbing leak
We inspect the full extent of the moisture damage, not just the visible area. Moisture meters and thermal cameras show how far water traveled. We document everything for insurance and provide a remediation scope.
Attic mold from poor ventilation
We inspect attic rafters, sheathing, and insulation for growth. If mold is found, we recommend remediation and ventilation improvements to prevent return. We follow ANSI/IICRC S520 standards for safe removal.
Crawl space mold affecting living areas
We inspect crawl spaces with boroscope cameras and moisture meters. If mold is found, we remove it, treat wood studs with antimicrobial coating, and recommend vapor barrier installation to keep moisture out.
Pricing process
Home mold inspection pricing
$250 - $600 depending on home size and sampling needs
Home square footage
Larger homes take longer to inspect and may require more air samples. Homes over 2,500 square feet typically cost more than smaller properties.
Number of samples
Each air sample costs $50-$75. Most inspections include two to four samples. If we need to sample multiple rooms or HVAC zones, the cost increases.
Attic and crawl space access
If your home has a crawl space or difficult attic access, it adds time to the inspection. We check these areas because they're common mold hotspots.
How much does a home mold inspection cost in Bloomington CA?
Most home mold inspections in Bloomington CA run $250 to $600 depending on square footage and how many samples we collect. A basic inspection with two air samples starts around $250. Larger homes or those needing attic, crawl space, and multiple room sampling run toward the higher end. We give you a flat quote before we arrive.
What does a home mold inspection include in Bloomington California?
Every inspection includes a full visual walkthrough, moisture meter readings, thermal imaging scans, and air sampling with spore trap cassettes. You get a written report with lab results from EMSL Analytical or Pro-Lab, photos of problem areas, and a remediation plan if growth is found. We check attics, crawl spaces, basements, and HVAC systems.
How long does a residential mold inspection take in Bloomington CA?
A typical residential mold inspection takes 1.5 to 3 hours on site. Smaller homes under 1,500 square feet usually finish in about 90 minutes. Larger properties with crawl spaces and multiple HVAC zones can take up to 3 hours. Lab results come back in 24-48 hours after the visit.
Who does home mold inspection near me in Bloomington?
Our certified inspectors serve all of Bloomington and surrounding San Bernardino County areas. We cover ZIP code 92316 and neighborhoods like Elm Heights, Downtown Bloomington, and Kirkwood. Call (833) 929-5837 to schedule. We offer same-day appointments when you call before noon.
Ready when you are
Schedule your home mold inspection Bloomington CA today
Don't let mold spread through your home. Call (833) 929-5837 now to schedule your inspection. We offer same-day appointments, flat-rate pricing, and lab results in 24-48 hours. Our certified inspectors serve all of Bloomington and San Bernardino County.

Talk with the local team
Request Home Mold Inspection
Call (833) 929-5837 any time, day or night, and a live person will answer. We schedule free inspections seven days a week and can usually get to your BLOOMINGTON property the same day. If you prefer email, send photos of what you are seeing and we will follow up with next steps.



