Toxic Mold Removal

Testing, containment, and full removal for homes and businesses

Toxic mold removal Bloomington CA done right the first time

When mold shows up after a leak, a storm, or a slow drip you never saw, it spreads fast. Our toxic mold removal Bloomington CA crews find the source, contain the contamination, and remove it to ANSI/IICRC S520 standards. We serve homeowners, landlords, and property managers across San Bernardino County with same-day inspections and honest pricing. If you can smell that musty odor, call us today.

Live phone supportUpfront optionsBacked workmanship
Call firstLive triage can help before arrival
Safety before speedRisks assessed before work begins
Diagnose the causeWe trace the source, not just the symptom
Approve the workScope and price explained upfront

What's included

What is included in toxic mold removal

Every toxic mold removal Bloomington CA job includes the core steps needed to make your property safe: inspection, containment, removal, treatment, and clearance testing. Reconstruction like drywall replacement or painting is quoted separately because the scope varies so much from job to job. Here is what you get as standard.

01

Full moisture and mold inspection

We use a moisture meter, thermal imaging camera, and boroscope inspection camera to map every wet zone and hidden growth area. You get photos and a written summary of what we found before any work begins.

02

Sealed containment with negative air

We build a 6-mil plastic containment with zipper doors and run negative air machines plus HEPA air scrubbers. This keeps spores from spreading into clean rooms during removal. Setup takes two to three hours on a typical home.

03

Physical removal of contaminated material

Contaminated drywall, insulation, and wood studs come out, get bagged, and are hauled away. Solid framing is HEPA vacuumed and wire-brushed. For heavy growth, we use a dry ice blasting machine to strip it clean.

04

Antimicrobial treatment and encapsulation

After cleaning, we apply antimicrobial coating and encapsulation sealant to every affected surface. We also run a fogger with Benefect or Concrobium to reach cavities and ductwork that are hard to access by hand.

05

Post-remediation clearance testing

We pull air samples with spore trap cassettes and compare indoor counts to an outdoor baseline. If clearance fails, we re-clean at no charge. You get the lab report in writing for your records or your insurance claim.

Service overview

What toxic mold removal Bloomington CA actually involves

Toxic mold removal Bloomington CA is the process of containing, removing, and cleaning mold contamination that produces mycotoxins and airborne spores. It is not a bleach wipe-down. We set up negative air machines and 6-mil plastic sheeting with zipper doors, run HEPA air scrubbers, and physically remove contaminated drywall, insulation, and wood studs. Every job follows ANSI/IICRC S520, the industry standard for mold remediation, and we verify the work with post-remediation air sampling before we call it done.

Bloomington sits in San Bernardino County where summer heat pushes attic temperatures past 130 degrees and winter rains soak crawl spaces that never fully dry. That swing feeds black mold growth behind baseboards, under bathroom vanities, and in attics above kitchens. If you have had water damage mold after a roof leak or a slab leak, toxic mold testing and removal Bloomington CA is the fastest way to stop spores from spreading through your HVAC system. We handle emergency toxic mold removal Bloomington CA calls seven days a week.

Same-day inspection responseCall before noon and we can usually be on-site the same day across Bloomington and the 92316 ZIP code. We bring a moisture meter, thermal imaging camera, and boroscope inspection camera so we can see inside walls without tearing your house apart. You get a written scope and a clear price before any work starts.
Certified, code-correct workOur technicians hold IICRC AMRT and ACAC CMR credentials and follow California Department of Public Health guidelines on every job. That matters when you sell a home or file a claim. We document moisture readings, containment setup, and post-remediation mold spore testing so your file is complete.
Containment that protects your familyWe seal off the work zone with mold remediation plastic sheeting and run negative air machines so spores never migrate into your living room or ductwork. Technicians wear full personal protective equipment, and we HEPA vacuum every surface before we remove containment. Your kids and pets stay safe the entire time.
Mold Remediation Service near me for BLOOMINGTON homes
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.

The service timeline

How our toxic mold removal process works

The process flexes to the condition, but these checkpoints keep decisions clear.

01

Inspection and testing

We walk the property with a moisture meter and thermal imaging camera to map every wet zone. If we find suspect growth, we pull spore trap samples and send them to EMSL Analytical or Pro-Lab. Lab results usually come back in 24 to 48 hours and tell us exactly which species we are dealing with.

Stage 1
02

Containment setup

We build a sealed work zone using 6-mil plastic sheeting, zipper doors, and duct tape, then install negative air machines and HEPA air scrubbers. This keeps spores from drifting into clean rooms. Setup on a typical Bloomington home takes two to three hours.

Stage 2
03

Removal and cleaning

We remove contaminated drywall, insulation, and wood studs, bag it, and haul it out. Porous materials come out; solid framing gets HEPA vacuumed, wire-brushed, and treated with Fiberlock or Shockwave. For heavy growth on joists, we use a dry ice blasting machine to strip it without chemicals.

Stage 3
04

Treatment and drying

We apply antimicrobial coating and encapsulation sealant to every cleaned surface, then run dehumidifiers and air movers until moisture readings match unaffected areas. Drying usually takes two to four days depending on how wet the structure was.

Stage 4
05

Clearance testing

Before we pull containment, we run post remediation mold testing with spore trap cassettes and compare indoor counts to an outdoor baseline. If levels are not where they should be, we clean again at no extra charge. You get the lab report in writing.

Stage 5

Tools & methods

Tools and methods we use on every job

Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.

01

Moisture meter and thermal imaging camera

Used during inspection to find hidden moisture behind walls, under floors, and above ceilings. Thermal imaging shows temperature differences that point to wet materials without opening anything up.

02

Boroscope inspection camera

A small camera on a flexible rod that lets us see inside wall cavities, ductwork, and crawl spaces. It confirms mold growth in areas we cannot reach by hand.

03

Negative air machine and HEPA air scrubber

These keep the containment under negative pressure and filter airborne spores down to 0.3 microns. They run continuously during removal and cleaning.

04

HEPA vacuum

Used to clean every surface inside containment before we remove the plastic. Standard shop vacuums blow spores back into the air; HEPA vacuums trap them.

05

Dry ice blasting machine

Strips mold off wood studs and joists without chemicals or abrasives. Ideal for structural framing that needs to stay in place. Leaves no residue behind.

06

Fogger

Applies Benefect or Concrobium as a fine mist to reach cavities, ductwork, and other areas that are hard to treat by hand. Helps neutralize lingering odors.

07

Spore trap sampler

Collects air samples onto spore trap cassettes for lab analysis. Used before and after remediation to prove the job is complete.

Use cases

When to call for toxic mold removal

These examples show how the service framework adapts rather than forcing every call through one repair.

Toxic Mold Removal
Bathroom vanity mold in Bloomington CentralA slow leak under a bathroom vanity soaked the drywall and baseboard for months. Visible black mold growth covered about 12 square feet, and the moisture meter read 28 percent on the adjacent wall. The homeowner noticed a musty odor in the hallway. → We removed the contaminated drywall and baseboard, HEPA vacuumed the framing, and treated it with Shockwave. Post-remediation air sampling showed spore counts dropped from 4,200 to 180 spores per cubic meter. The bathroom was back in service in four days.

Attic mold on sheathing in Highland Village

After a summer of 100-degree days, the homeowner found dark staining across roughly 200 square feet of attic sheathing. Insulation was saturated and the attic had no ridge vent. Spore trap samples confirmed elevated Aspergillus and Penicillium counts. → We removed the contaminated insulation, treated the sheathing with antimicrobial coating, and installed ridge and soffit ventilation. Clearance testing passed on the first try. Attic temperatures dropped by 25 degrees after the ventilation upgrade.

Crawl space mold after winter rains in Blue Ridge

Winter rains left standing water in a 600-square-foot crawl space for three weeks. Joists and subfloor sheathing were covered in mold, and the musty smell was pushing up into the living room. Moisture readings on the joists hit 32 percent. → We pumped out the standing water, removed contaminated insulation, dry ice blasted the joists, and installed a 12-mil vapor barrier. Drying took four days. Post-remediation testing showed spore counts back to outdoor baseline levels.

Problems we solve

Mold problems we solve for Bloomington properties

Mold shows up in different ways depending on the building and the season. Here are the most common problems we run into on toxic mold removal Bloomington CA jobs, and what happens if they are ignored.

ISSUE

Musty odor that will not go away

We use a boroscope inspection camera and thermal imaging to locate the source, then remove the contaminated material and treat the cavity with antimicrobial coating. Odor is usually gone within 24 hours of final cleaning.

SYMPTOM

Visible black mold on drywall or framing

We cut out contaminated drywall and insulation, HEPA vacuum the framing, and apply Shockwave or Fiberlock. For heavy growth on joists, we use dry ice blasting mold removal to strip it without chemicals.

SIGN

Mold after a roof leak or burst pipe

We handle water damage mold remediation from start to finish: stop the moisture source, dry the structure with Dri-Eaz and Phoenix Restoration Equipment dehumidifiers, then remove and treat affected materials.

ALERT

Crawl space mold after winter rains

We remove contaminated insulation, treat the joists and subfloor, and install a vapor barrier to keep the space dry. Most crawl space jobs take three to five days including drying and clearance testing.

Pricing process

What toxic mold removal costs in Bloomington

$1,200 - $6,500 depending on scope

Phase 01

Square footage affected

The bigger the contaminated area, the more material has to come out and the more containment and cleaning work is needed. A 20-square-foot bathroom job is a very different scope than a 600-square-foot crawl space.

Phase 02

Mold species and severity

Toxigenic species like Stachybotrys require more careful handling and more thorough cleaning. Heavy growth on structural framing takes longer to remove than surface growth on drywall.

Phase 03

Access and containment difficulty

Attics and crawl spaces are harder to work in than open rooms. Tight access means more setup time and more labor hours. Second-story work or occupied homes add complexity too.

Questions before we arrive

Frequently Asked Questions

Toxic Mold Removal
Call (833) 929-5837
How much does toxic mold removal cost in Bloomington CA?

Most residential jobs in Bloomington run $1,200 to $6,500 depending on square footage and how far the mold has spread. A single bathroom or small attic area usually lands near the low end. Full crawl space or multi-room remediation with reconstruction pushes toward the high end. Testing adds $300 to $600. We give you a written scope and price before any work begins.

How do I know if I have toxic mold in Bloomington California?

The three most common signs are a musty odor that will not go away, visible dark staining on drywall or framing, and allergy-like symptoms that get worse when you are home. A moisture meter reading above 16 percent on drywall or wood is a red flag. If you have had any water intrusion in the last 12 months, book testing even if you cannot see growth.

Is toxic mold removal covered by insurance in Bloomington CA?

It depends on the cause. Most California homeowner policies cover mold remediation when it stems from a sudden, accidental event like a burst pipe or appliance failure. Mold from long-term neglect or slow leaks is usually excluded. We document everything with photos, moisture readings, and lab results so your adjuster has what they need to process the claim.

Who does black mold remediation near me in Bloomington?

We do. Mold Remediation Service Bloomington handles black mold remediation in Bloomington CA and across San Bernardino County, including Blue Ridge, Bloomington Central, and the 92316 ZIP code. Call (833) 929-5837 and we can usually schedule an inspection the same day. We are licensed, insured, and we carry IICRC and ACAC certifications.

Ready when you are

Get toxic mold removal Bloomington CA started today

Mold spreads fast, and every day you wait means more contaminated material to remove. Call (833) 929-5837 and we will schedule an inspection, give you a written scope, and get a crew out to your property. Licensed, insured, and available 24/7 across San Bernardino County.

Toxic Mold Removal

Talk with the local team

Request Toxic Mold Removal

Call (833) 929-5837 any time, day or night, and a live person will answer. We schedule free inspections seven days a week and can usually get to your BLOOMINGTON property the same day. If you prefer email, send photos of what you are seeing and we will follow up with next steps.

18762 Valley Blvd, Bloomington, CA 92316, USA, BLOOMINGTON, CaliforniaMain office · technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now